Contact 1-800-762-1142 for assistance.

Do not return to place of purchase.

Assembly InstructionsGeneral Components & Features

Familiarize yourself with all components before proceeding. Refer to page 5 for hardware and components, and page 21 for specifications.

The white ceramic cone in the top of the engine is an important piece. DO NOT REMOVE.

Do NOT attempt assembly unless all components are available. If you believe a component is missing or damaged, contact 1-800-762-1142 for assistance.

Note: All hardware is mounted on a cardboard pack and numbered to match their assembly step.

Additional Requirements

The following items are not included, but are necessary for the proper assembly of your heater. Do NOT attempt to assemble without proper tools. A hex (Allen) wrench is necessary and is included in the parts bag.

(1) 7/16” Wrench

(1) 9/16” Wrench

(1) 7/16” Socket Wrench

(1) #2 Phillips Head Screwdriver

(1) Leak Detection Solution (Instructions on how to make solution are included in step 12)

(1) Precision Filled LP Gas Grill Cylinder with Acme Type 1 external threaded valve connection (4-5 gallon size)

Note: You must follow all steps to properly assemble heater.

Step 1 – Attach Legs to Base

• Secure Legs to Base using (2) Large Bolts, (2) Small lock washers and (2) Small nuts per leg. Finger tighten only.

• Do not fully tighten until Step 2.

• Attach small ‘s’ hook on Cylinder Restraint Chain to left leg.

Owner’s manual and assembly instructions: model 223600 outdoor patio heater

1/15/03

6