Bodyguard E350 Elliptical manual Quick Troubleshooting Check List, Problem Possible CAUSE/SOLUTION

Quick Troubleshooting Check List

Table 5

PROBLEM		POSSIBLE CAUSE/SOLUTION
•	Computer will	• Check THE fuse – replace if necessary.
	not light on	• Check building electrical power line and fuse box – contact
	when power
		qualified electrician.
	is turned ON.
		• The computer cable may be disconnected from the computer board
		– inspect condition of this cable.
		• Check that power cord is functional – replace if necessary.
•	Crank arms	• Remove the cover, tighten the bolts holding the crank arms (long &
	are loose.	short) with a hexagonal bolt 3/8.
•	Upper frame	• Remove the cover and tighten the five screws holding the upper
	is loose.	frame to the base frame with the provided Allen key.
•	No resistance	• Speed sensor out of alignment – realign or replace if necessary.
	on pedals,
	but computer	• Transformer or power supply board unit defective – replace
	lights up.	necessary parts.
		• With power OFF, verify that all wire connections are secure.
•	Computer key(s)	• Keys may have been damaged from liquids penetrating behind seal
	not responding
		– replace computer display.
	to touch.
		• Excessive amount of cleaning solution used.
		• Use mild cleanser on damp cloth only when cleaning computer
		console and unit.

For any further information regarding service isssues, please contact your Authorized Bodyguard® Dealer.

34