Bolens 452 Thru 465 warranty Attaching The Bag

9.a. Align the chipper chute over the weld studs, so the slot in the bottom of the chute is facing down.

b.Secure chipper chute with the three cupped washers (cupped side against the chipper chute) and hex nuts previously removed. Tighten the nuts at this time. See Figure 3-9.

Attaching The Bag

10. To attach the bag:

a.Place the opening of the bag completely over the chute deflector.

b.Pull on the drawstring until the bag is tight around chute deflector opening.

c.Clip drawstring back on itself, tight against chute deflector to secure into position. See Figure 3-10.

B

Figure 3-9

C

A

3

Setting Up

Your Chipper

Shredder

IMPORTANT

This unit is shipped without gasoline or oil in the engine. Be certain to service engine with gasoline and oil as instructed in the separate engine manual before operat- ing your machine.

Figure 3-10

NOTE: All references in this manual to the left or right side of the chipper shredder is from the operating position only. Excep- tions, if any, will be specified.

NOTE: This Operators Manual covers a range of product specifica- tions for various models. Characteristics and features discussed and/or illustrated in this manual may not be ap- plicable to all models. MTD LLC reserves the right to change product specifications, designs and equipment without notice and without incurring obligation.