Bosch Appliances 250SX NG, 250SX LP manual Close gas valve. Open windows

Warning

Warning: Field wiring connections and electrical grounding must comply with local codes, or in the absence of local codes, with the latest edition of the National Electric Code, ANSI/NFPA 70, or in Canada, all electrical wiring must comply with the local codes and the Canadian Electrical Code, CSA C22.1 Part 1.

Warning: Shock hazard line voltage is present. Before servicing the water heater, turn off the electrical power to the water heater at the main disconnect or circuit breaker. Failure to do so could result in severe personal injury or death.

What to do if you smell gas
• Close gas valve. Open windows.
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any
	phone in your building.
• Immediately call your gas supplier from a neighbor’s
	phone. Follow the gas supplier’s instructions.
•	If you cannot reach your gas supplier, call the fire
	department.			Fig. 1
•	Installation and service must be		performed by a
	qualified installer, service agency or the gas supplier.
		Warning: The heater	must be
		disconnected from the gas supply
		piping system during any pressure
		testing of that system at test pressures
		equal to or more than 0.5 psig.

FCC:

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Fig. 2

6 720 607 057 3