![](/images/new-backgrounds/1265769/26576959x1.webp)
INTEGRUS Installation and User Instructions Integrus Transmitters | en 24 |
|
|
2.4.2Navigate through the menu
Operating the menu is always a sequence of alternating turns and pushes:
Turn the button to:
•Cycle through the menu items within a menu (the menu item number and title on the first line is blinking).
•Go to a settable option within a menu item (a blinking cursor moves through the menu screen).
•Cycle through the available values for a settable option (the value is blinking).
Push the button to:
•Confirm a chosen menu item (the menu item num- ber and title stops blinking, a blinking cursor appears).
•Go to a
•Confirm the selection of a settable option (the cur- sor disappears, the option value starts blinking).
•Confirm a selected value for a settable option (the value stops blinking, the cursor appears again).
After 3 minutes of inactivity, the display automatically switches back to the first item of the Main menu (Transmitter Status).
Each menu item is identified by a number (for the Main menu) or by a number plus a character (for the
Most menu items have one or more settable configura- tion options. The value of an option can be changed by selecting a value from a list of available values.
To navigate through the Main menu:
1.Turn the button to move through the Main menu items. The item number and title starts blinking. (The first item, Transmitter Status, doesn’t blink.)
To jump to a sub-menu:
1.Navigate in the Main menu to an item with three dots (e.g. ‘Setup ...’).
2.Push the button to go to the sub menu. The sub- menu item character and title starts blinking.
Note: To enter the Setup
push and hold the button for at least
3 seconds.
To navigate through a sub-menu:
1.Turn the button to move the cursor to the sub- menu item character.
2.Push the button. The item character and title starts blinking.
3.Turn to select another
4.Push to confirm the selection.
To change option values
1.Navigate to the applicable menu item.
2.Turn the button to move the cursor to the option value you want to change.
3.Push the button to activate the option. The option value starts to blink.
4.Turn the button to select a new option value.
5.Push the button to confirm the new value. The option value stops blinking.
6.Turn the button to move the cursor to another settable option (when available) and repeat steps 3 to 5.
main menu | |
item number | item character |
4D Ch. Quality
Per Channel ...
menu item title
three dots indicate that the item has a
4D Channel 12
Stereo PQ In 03
option values