INTEGRUS Installation and User Instructions Integrus Radiators

en 47

 

 

The following are found on the radiator printed circuit

board: (Figure 3.13):

 

 

 

5

6

 

Don’t use this radiator in combination with LBB 4511/00 and LBB 4512/00 radiators in one system, as the internal signal delay of these radiators are different.

No automatic cable termination: the termination plug has to be connected to the last radiator in a trunk.

No communication of the radiator status to the transmitter.

Using this radiator at 105 to 125 V requires internal adjustments.

Figure 3.13 LBB 3410/05 Radiator (PCB)

5.Green LED - indicates that the radiator is switched on and is receiving carrier waves from the transmitter.

6.Red LED - indicates that the radiator output is 70% or less of the normal output level.

3.2.2 Radiator Status Indication

When the radiator is transmitting, a green LED mount- ed internally on a printed circuit board illuminates. If there is a failure in the radiator, a red LED illuminates on the printed circuit board.

Mains voltage selection of 115 V or 230 V is internally selectable. On delivery the radiator is set for 230 Va.c. operation. To alter the mains voltage selection for the LBB 3410/05 radiators, it is necessary to solder two leads to contacts on the printed circuit board (PCB) inside the radiator. To locate the PCB, remove the four securing screws at the rear of the radiator and remove the unit from its housing. Remove the PCB from its mounting by removing the PCB’s six securing screws and the small connector X1 (figure 3.13). To select

115 V operation, solder two small leads, one connect- ing X4 to X6 and one connecting X5 to X7. Then remove the small SMD resistor R3. When this is com- pleted replace fuse F1 (160 mA) with a fuse rated at 350 mA.

Limitations:

Not more than the first 4 carriers can be transmit- ted.

Not more than 100 m cable length from transmitter to last radiator.

Directly connection of the radiators to the transmit- ter with equal cable length. In loop-through con- nection, the total cable length from the first to the last radiator may not exceed 5 meters. Reason: there are no facilities on this radiator for compen- sating the cable signal delay.

3.2.3 Mounting the Radiator

Radiators in permanent installations can be fixed to a wall, hung under a ceiling or balcony or secured to any sturdy material using the unit’s built-in bracket and mounting adaptor supplied with the radiator (figure 3.14). In non-permanent installations, a floor stand can be used. The mounting adaptor enables the radiator to be positioned for optimum performance.

Figure 3.14 LBB 3410/05 Radiator Mounting

Bosch Security Systems 2005-04 3122 475 22015en

Page 53
Image 53
Bosch Appliances 3122 475 22015en manual Mounting the Radiator, Limitations

3122 475 22015en specifications

Bosch Appliances are synonymous with quality and innovation, and the model 3122 475 22015en showcases these attributes elegantly. This appliance combines advanced engineering with intuitive design, making it a valuable addition to any modern kitchen.

One of the standout features of the Bosch 3122 475 22015en is its efficiency. Designed to optimize performance while using minimal energy, this appliance is ideal for environmentally-conscious consumers. It complies with strict energy standards, ensuring that it not only delivers superior results but also helps in reducing household energy bills.

The appliance is equipped with cutting-edge technology that enhances its functionality. One significant innovation is the EcoSilence Drive, which ensures powerful performance with minimal noise. This makes the Bosch 3122 475 22015en an excellent choice for open-concept living spaces or homes where silence is valued.

Another noteworthy aspect is its PrecisionWash technology. This intelligent feature uses sensors to detect soil levels, adjusting the wash cycle for optimal cleaning power. This ensures that every dish, regardless of the load, comes out sparkling clean, thus providing peace of mind for users who value cleanliness.

The design of the Bosch 3122 475 22015en is sleek and modern, with a stainless-steel finish that complements contemporary kitchen aesthetics. Its ergonomic controls are intuitive and user-friendly, making operation straightforward even for those who are not technologically savvy.

In addition to its performance and aesthetics, safety is also a priority in the design of this appliance. It includes multiple safety features such as a Child Lock for added peace of mind, ensuring a safe environment for households with young children.

Furthermore, this model incorporates flexible loading options, including adjustable racks and foldable tines, allowing users to customize the interior space to accommodate various sizes and shapes of dishes. This adaptability maximizes utility and enhances user experience.

In conclusion, the Bosch Appliances 3122 475 22015en is a perfect blend of performance, efficiency, and innovative technology. With features like EcoSilence Drive and PrecisionWash, alongside a focus on safety and flexibility, it truly embodies Bosch's commitment to creating high-quality appliances that meet the needs of modern living. Whether you are an avid chef or simply enjoy hosting, this appliance is designed to make everyday tasks easier and more efficient.