Bosch Appliances 5000, AN installation manual 3.3.3Surface mounting

16 en Installation FLEXIDOME 5000 AN

Figure?3.4?Flush mounting - electrical box (4S)

1.Two screws (not supplied)

2.Integrated camera unit and base

3.4S electrical box

3.3.3Surface mounting

When using the surface mounting box:

–With a side connection, remove the cap covering the side entrance.

With a rear connection, leave the cap in place.

–Attach the conduit to the mounting box.

–Release the two clips at the bottom of the watertight connection compartment to remove it from the mounting box.

–Open the cover of the watertight compartment in the mounting box by releasing the five clips.

–Run the power and video cables through separate rubber grommets into the watertight compartment.

–Run the cable from the camera into the watertight compartment through the supplied grommet.

–Make the connection inside the watertight compartment and clip on the cover to seal it.

AM18-Q0648 v1.0 2013.03 Installation Manual Bosch Security Systems