Bosch Appliances AN, 5000 installation manual 4.2.2Menu navigation

FLEXIDOME 5000 AN Connection and set-up en 21

3.Thumbwheels

4.Navigation buttons (5)

5.Focal length

6.Focus

A.Pan-axis rotation

B.Tilt-axis rotation

C.Twist-axis rotation

The physical default position of the camera is that the top of the image corresponds to the indication TOP.

CAUTION!

CCD image sensors are highly sensitive and require special care for proper performance and extended lifetime. Do not expose them to direct sunlight or bright spotlights in operating and non-operating conditions. Avoid bright lights in the field of view of the camera.

The camera module position can be adjusted along three axes. When adjusting the camera position, ensure that the picture display on the monitor is level. Set the camera to the desired position by performing the following steps:

–For horizontal adjustment along the pan axis (A), rotate the camera module in the base. Do not rotate more than 360°.

–To obtain a horizontal horizon (for tilted ceilings or sidewall mounting), rotate the base of the lens along the twist axis (C) to align the picture shown on the monitor. Do not rotate more than 340°.

–For vertical adjustment along the tilt axis (B), loosen thumbwheels, position camera, then gently tighten thumbwheels to secure camera. Do not rotate more than 90°.

4.2.2Menu navigation

Five keys, located on the side panel, are used for navigating through the menu system.

Bosch Security Systems Installation Manual AM18-Q0648 v1.0 2013.03