Bosch Appliances 5000, AN installation manual 4.2.5Closing the unit

24 en Connection and set-up FLEXIDOME 5000 AN

4.2.5Closing the unit

When the camera position is set and all adjustments have been made, close the unit.

1.Place the inner liner (with attached sealing ring) in position, aligning its fin with the bracket on the base.

2.Place the dome onto the base and rotate until it clips into place. (If necessary clean its surface with a soft cloth.)

3.Place the trim ring over the dome.

4.Align the tamper-resistant screws in the trim ring with the threaded ends in the mounting base.

5.Use the special screwdriver bit supplied to tighten the three tamper-resistant screws.

AM18-Q0648 v1.0 2013.03 Installation Manual Bosch Security Systems