FLEXIDOME 5000 AN | Safety en 7 |
|
|
1.3Connection in outdoor applications
1.3.1Safety precautions
Coax grounding: If an outside cable system is connected to the unit, ensure that the system is grounded.
U.S.A. models only: Section 810 of the National Electrical Code, ANSI/NFPA No.70, provides information regarding proper grounding of the mount and supporting structure, grounding of the coax to a discharge unit, size of grounding conductors, location of discharge unit, connection to ground electrodes, and requirements for the grounding electrode.
Power lines: An outdoor system should not be located in the vicinity of overhead power lines, electrical lights, or power circuits, or where it may contact such power lines or circuits. When installing an outdoor system, extreme care should be taken to keep from touching power lines or circuits, as this contact may be fatal. U.S.A. models only - refer to the National Electrical Code Article 820 regarding installation of CATV systems.
12 VDC/24 VAC power source: This unit is intended to operate with a limited power source, this power source must comply with EN60950. User supplied wiring, from 12 VDC/24 VAC supply to unit, must be in compliance with electrical codes (Class 2 power levels). Do not ground the 12 VDC/24 VAC supply at the terminals or at the unit's power supply terminals. Connection: The unit has connection terminals on flying leads. In wet or outdoor installations make use of the
Bosch Security Systems | Installation Manual |
