LTC 8555 Series Instruction Manual Troubleshooting
9.2Local Keyboard Test --
Keyboard User Function 1
Keyboard User Function 1 is an Allegiant system keyboard feature used to verify that all the keyboard’s LEDs and switches are in working order. This function also automatically calibrates the center position of the analog joystick. Upon starting this test, the keyboard emits a short beep and all LEDs light for about two seconds. During this time, note any LED failures.
Each key may be pressed to display a unique code number associated with that key. Follow the table below to ensure that the keyboard is properly processing all keys. The amount of deflection of the Joystick during pan/tilt actions is indicated by a speed indicator value in the first digit position of the LED display. Rotation of the Zoom control indicates a value of x41 when rotated clockwise, and x40 when rotated counterclockwise. Push USER last, as this exits the keyboard test mode.
If the login system features have been selected by the system installer, the same local test can be initiated while the keyboard is not online, by pressing "*" (the star key).
EN 29
Key | Value |
|
|
Set | 001 |
|
|
Prog | 002 |
|
|
Lock | 003 |
|
|
Alarm | 004 |
|
|
Ack | 005 |
|
|
Monitor | 008 |
|
|
Shot | 009 |
|
|
Digit 1 | 010 |
|
|
Digit 4 | 011 |
|
|
Digit 7 | 012 |
|
|
Digit 0 | 013 |
|
|
* (Star) | 016 |
|
|
On | 017 |
|
|
Digit 2 | 018 |
|
|
Digit 5 | 019 |
|
|
Digit 8 | 020 |
|
|
Camera | 024 |
|
|
Off | 025 |
|
|
KEY | VALUE |
|
|
Digit 3 | 026 |
|
|
Digit 6 | 027 |
|
|
Digit 9 | 028 |
|
|
Enter | 029 |
|
|
Seq | 032 |
|
|
Run | 033 |
|
|
Next | 034 |
|
|
Prev | 035 |
|
|
Hold | 036 |
|
|
Clear | 037 |
|
|
Focus (high) | 042 |
|
|
Focus (low) | 043 |
|
|
Iris (high) | 045 |
|
|
Iris (low) | 046 |
|
|
(Down) | x50 |
|
|
(Right) | x51 |
|
|
(Up) | x52 |
|
|
(Left) | x53 |
|
|
User | (enter/exit) |
|
|
Bosch Security Systems 29 August 2003