![Keyboard Expander)](/images/new-backgrounds/55547/5554751x1.webp)
LTC 8555 Series Instruction Manual Installation | EN 13 |
|
|
The larger Allegiant models support Keyboard Expander accessory units. These accessory units are used with LTC 8557 Series Remote Hookup Kit, to provide additional keyboard connections to the system, as shown in FIGURE 5.
Large model Allegiant system main CPU bay
LTC 8714 Port
Expander
Standard Allegiant Keyboard Ports 1 to 8
Up to 8 Keyboards per |
Expander |
Up to 8 Keyboards
Junction box and
3 m (10 ft) cable supplied with LTC 8557 kit
Up to 1 .5 km (5000 ft) of user- supplied shielded twisted pair cable
(Belden 9841 or equivalent)
Junction box and | 3 m (10 ft) data/ | |
power cable supplied | ||
power adapter | ||
with keyboard | ||
supplied with | ||
| ||
LTC 8557 kit |
|
Figure 5: Configuration using LTC 8714 Keyboard Expander unit (Refer also to Instructions supplied with LTC 8714
Keyboard Expander)
5.3LTC 8555/02 and LTC 8555/03 (RS-232 Protocol Model) Installation
5.3.1General
The
keyboard numbers is necessary when
The table below indicates which keyboard number will be assigned, based on the connection being used.
Keyboard Connection Type | Keyboard Number |
Direct to Console port | 1 |
Direct to Printer port | 5 |
|
|
Port 1 of Expander, when |
|
Expander is connected to Console port | 1 |
|
|
For each keyboard being installed, an LTC 8557 Series Remote Hookup Kit (sold separately),
Refer to the most applicable configuration diagram.
5.3.2Keyboard Number Assignments When Using
Use of
Port 2 of Expander, when |
|
Expander is connected to Console port | 2 |
|
|
Port 3 of Expander, when |
|
Expander is connected to Console port | 3 |
Port 4 of Expander, when |
|
Expander is connected to Console port | 4 |
|
|
Port 1 of Expander, when |
|
Expander is connected to Printer port | 5 |
Port 2 of Expander, when |
|
Expander is connected to Printer port | 6 |
|
|
Port 3 of Expander, when |
|
Expander is connected to Printer port | 7 |
Port 4 of Expander, when |
|
Expander is connected to Printer port | 8 |
Bosch Security Systems 29 August 2003