LTC 8555 Series Instruction Manual User Information | EN 26 |
|
|
No. | Function Description | Access Level |
|
|
|
27. | SELECT KEYBOARD | 12 |
|
|
|
28. | SELECT CONSOLE | 12 |
|
|
|
29. | RESET | 12 |
30.SELECT CONSOLE
(except LTC 8900) | 12 |
30.SELECT CONTROLLER
(LTC 8900 ONLY) | 12 |
31.SELECT PRINTER
| PARAMETERS (except LTC 8900) | 12 |
31. | SELECT CONSOLE | 12 |
| (LTC 8900 ONLY) | |
|
|
|
32. | SELECT ALARM | 12 |
|
|
|
33.DISPLAY USER NUMBER
AND PRIORITY | Any |
34.SELECT CAMERA CONTROL
| INDICATOR | 1 |
35. | SET CONTROLLABLE CAMERA | 1 |
|
|
|
36. | SELECT CROSSPOINT DATA | 1 |
|
|
|
37. | USE PHYSICAL R/D ADDRESSES | 12 |
|
|
|
38. | SET EXPANDED PRINTER PORT | 12 |
|
|
|
39. | SELECT DIU INTERFACE PORT | 12 |
40.SET SWITCHER PHASE DELAY
| (LTC 8100, 8200, & 8300 only) | 12 |
41. | CACHE REMOTE CAMERAS | 12 |
|
|
|
42. | KEYBOARD | 12 |
|
|
|
43. | CPU BATTERY STATUS | Any |
|
|
|
99. | LIST AVAILABLE USER FUNCTIONS | Any |
|
|
|
NOTES:
1.When using LTC 8900 systems, the access levels required for this setting are 1 to 63.
2.Password is required to change this setting.
7.7 Error Messages
The keyboard is designed to emit a short beep and display an error number whenever Allegiant system error messages are generated. Error messages are generated for various reasons, including entry of an erroneous key sequence or restricted function invocation.
Some errors contain more than one message. For example, if an attempt is made to access a monitor or controllable camera which has been locked by a higher priority operator, the camera number is temporarily replaced with an appropriate error number, then the number of the operator who placed the lock is briefly displayed.
Refer to the Installation manual supplied with the Allegiant system for a complete listing of error messages applicable to your model system.
Bosch Security Systems 29 August 2003