16
Enable Remote Account Management
I have this feature.
I do not have this feature.
This feature requires a passcode.
Your security system is managed remotely from your security company without
having a service person on the protected premises. By using Command 43, you
can enable Remote Account Management (RAM). Remote Account Management
is done with the aid of a specially equipped computer at your security company.
Typical remote programming changes can include adding or deleting system
commands and changing personal passcodes or entry/exit delay times.
COMMAND 4 3

To use COMMAND 4 3:

1. Your system is armed or disarmed to perform this function.
2. Call your security company using this phone number:
_________________________________________________________
This number is designated for the Remote Account Manager. You
must make the call using the telephone located:
_________________________________________________________
3. Identify yourself and your premises (account number, name,
address, etc.) and advise the operator of the programming
changes you want performed.
4. When the operator directs you, enter [COMMAND] [4] [3] at
your keypad:
Press the [COMMAND] bar. The Command mode indicator light
comes on.
5. Press the [4] key, and then press the [3] key. The telephone line the
call was made from is not active when Remote Account Management
is in progress. You can hang up the telephone.
6. When Remote Account Management is completed, your
telephone line automatically restores normal service.