26 en Configuration Using HyperTerminal | ATM/POS Bridge |
|
|
6.3Configuring Bridge Operation via HyperTerminal
After you establish a HyperTerminal connection between a PC and the bridge, use the menu structure to configure the bridge settings. Press the F1 key to open the System Options menu, then select 1 - Network Setup.
6.3.1Network Setup
The Network Setup enables you to provide a label for the bridge and to configure network settings.
CAUTION!
Changing a parameter on the Network Setup page may interrupt the operation of the ATM/POS Bridge. Contact your network administrator before making any changes.
F.01U.171.816 1.0 2010.09 | Installation Manual | Bosch Security Systems, Inc. |
