![](/images/new-backgrounds/1165613/16561335x1.webp)
18 en Configuration | ATM/POS Bridge |
|
|
5.2Configuring Operation via a Network
After the bridge is properly configured for network access, you can configure the COM and Terminal settings via Internet Explorer.
To access the bridge configuration page:
1.Launch Internet Explorer and navigate to the IP address for the bridge.
Internet Explorer displays the ATM/POS Bridge interface.
2.Use the menu in the left pane to navigate to the various configuration pages.
3.Refer to the following sections for details about each configuration page.
4.Click Save on each page to accept the changes.
5.2.1System Menu
The System Menu contains settings for bridge operation.
F.01U.171.816 1.0 2010.09 | Installation Manual | Bosch Security Systems, Inc. |