14 en | Installation NurseCall Relay Unit
F.01U.252.722 | V1 | 2011.12 User Manual Bosch Security Systems
3.2 Installation

3.2.1 Generalities

Install the NurseCall Relay Unit in a dry place, away from any source of heat.
Tools required:
– Torx T20 screwdriver.
– Torx T10 screwdriver.

3.2.2 Installation on a piece of furniture

It is recommended to place the NurseCall Relay Unit on a non-slippery surface. However, do
not place anything (blanket or lace) on top of the unit.

3.2.3 Wall installation

You can fasten the NurseCall Relay Unit on a smooth wall surface using two screws. The
distance between holes is 157 mm.
The power line cord should be placed inside the cable channels on the bottom of the
NurseCall Relay Unit.

3.2.4 Installing the antenna

1. Use the straight adapter (4) for wall installation or the right angled bended adapter (3)
for installation on a piece of furniture.
2. Fasten the adapter (3) or (4) on the antenna connector (1).
3. Fasten the antenna (2) on the adapter.
2
3
2
4
1