Vulcan-Hart ML-136654, ML-136656, ML-136657, 1G4BD Installation, Fryer Model No Device Serial No

GBD_GBDF SERIES GAS FRYERS

Check that the following have been included:

ŠCrumb Rack(s)

ŠBasket Hanger(s)

ŠTank Brush

ŠAdjustable Casters (4) two locking, two non-locking for freestanding fryers. Fryer Batteries with the KleenScreen PLUS® Filtration System have casters installed from the factory.

ŠDrain Pipe Extension for freestanding fryers only.

ŠTwin Fry Baskets (2) per fry tank

ŠCleanout Rod

ŠCrumb Scoop

ŠFryer Batteries with the KleenScreen PLUS® Filtration System

•Filter Pan

•Suction Tube

•Screen Assembly

•Complimentary Pack of Micro-Filtration Envelopes

•Crumb Basket

•6’ high temperature discard hose

ŠManual and Warranty

Do not use the door or its handle to lift the fryer.

INSTALLATION

Before installing the fryer, verify that the type of gas (natural or propane) agrees with the specifications on the fryer data plate, which is located on the inside of the door panel. Make sure the fryer is configured for the proper elevation.

Record your fryer model, device, and serial numbers for future reference in the space provided below. This information can be found on the fryer data plate.

Fryer Model No: ___________________________

Device: ___________________________________

Serial No: ________________________________

VULCAN-HART F-32934 Rev. B (June 2008)

-5-