Manuals / Vulcan-Hart / Kitchen Appliance / Fryer

Vulcan-Hart ML-136655, ML-136654, ML-136656 Filling Tank with Shortening, Basic Frying Instruction

Models: 1G6BD 1G4BD ML-136647 2G8BDF 1G6BD ML-136648 1G8BD ML-136649 1G4BD 2G4BDF 2G6BDF 2XG4BDF 3G4BDF 3G6BDF 2XG8BDF 3G8BDF 4G6BDF 4G8BDF 2XG6BDF 4G4BDF ML-136655 ML-136649 ML-136650 ML-136653 ML-136647 ML-136648 ML-136652 ML-1 ML-136651 ML-136681 ML-136657 ML-136656 ML-136654

1 26

Download 26 pages 30.3 Kb

Page 11

GBD_GBDF SERIES GAS FRYERS

FILLING TANK WITH SHORTENING

Close the drain valve.

Fill the fryer tank with shortening. Vulcan recommends using liquid shortening.

Shortening level should be between the MIN and MAX lines in the fryer tank.

Shortening will expand when heated. Do not fill the fryer tank past the MAX line.

Press the melt switch to liquid or solid shortening.

Add fresh shortening as needed to maintain oil level.

BASIC FRYING INSTRUCTION

Set the desired temperature and allow shortening to heat up to that temperature.

Fry items that are the same size to ensure equal doneness.

Drain or wipe dry raw or wet foods to minimize splatter when lowering into hot shortening.

Add fresh shortening as needed.

VULCAN-HART

F-32934 Rev. B (June 2008)

-11-

Image 11

Vulcan-Hart ML-136655, ML-136654, ML-136656, ML-136657, ML-136681 manual Filling Tank with Shortening, Basic Frying Instruction

Contents

Installation & Operational Manual Important for Your Safety Table of Contents General IntroductionOrdering Parts Unpacking Fryer Model No Device Serial No Installation United States Codes and StandardsClearances Location Canada AssemblyFlue Connection Fryers with Casters Testing the GAS Supply Piping SystemGAS Connection GAS Pressures ALL Models Electrical Connection Operation OVER-TEMPERATURE ShutdownCleaning Leveling the Fryer Basic Frying Instruction Filling Tank with Shortening Fry Basket Capacity Extending Shortening LifeFry Basket Guidelines Start Button Turning on the FryerTurning OFF the Fryer Filtering the OIL Extended Shutdown Draining the Tank Boil OUT ProcedureWeekly or when oil is replaced Cleaning GAS KleenScreen Plus Models Filtering Instructions for KleenScreen Plus Fryers Same Suction Tube Step Do not Wash Fabric Envelope Operation Filtering Procedure Quick Start Guide for Solid State Knob Controls Filtering in 6 Easy Steps Flush and Discard Filtering TIPRemoving Excess Debris from the Screen Filter Thermal Overload Protection Button Boil OUT Procedure Australia MaintenanceService in the US and Canada Flue Vent Inspection