Codes and Standards, Clearances, Location

GBD_GBDF SERIES GAS FRYERS

Clearances:

Minimum clearance from combustible construction:

6” (15 cm) from the sides of the fryer 6” (15 cm) from the back of the fryer

The fryer may be installed on combustible floors.

Minimum clearance from noncombustible construction:

0” from the sides of the fryer 0” from the back of the fryer

Between the fryer and any open-top flame units: 16” (41 cm)

Allow space for servicing and operation.

Location:

Install fryer in an area with sufficient air supply for gas combustion at fryer burners.

Do not obstruct the flow of combustion and ventilation air.

Provide adequate clearance for air openings into the combustion chamber.

Do not permit fans to blow directly onto fryer.

Avoid wall-type fans, which create cross-currents within a room. Avoid open windows next to sides or back.

CODES AND STANDARDS

The fryer must be installed in accordance with:

In the United States:

State and local codes, or in the absence of local codes, with:

National Fuel Gas Code, ANSI-Z223.1/NFPA #54 (latest edition). Copies may be obtained from The American Gas Association Accredited Standards

Committee Z223, @ 400 N. Capital St. NW, Washington, DC 20001 or the Secretary Standards Council, NFPA, 1 Batterymarch Park Quincy, MA 02169- 7471.

NFPA Standard #96 Vapor Removal from Cooking Equipment, latest edition, available from the National Fire Protection Association, Batterymarch Park, Quincy, MA. 02169-7471.

VULCAN-HART

F-32934 Rev. B (June 2008)

-6-

Vulcan-Hart ML-136652, ML-136654, 4G4BDF Codes and Standards, Clearances, Location, United States

Models: 1G6BD 1G4BD ML-136647 2G8BDF 1G6BD ML-136648 1G8BD ML-136649 1G4BD 2G4BDF 2G6BDF 2XG4BDF 3G4BDF 3G6BDF 2XG8BDF 3G8BDF 4G6BDF 4G8BDF 2XG6BDF 4G4BDF ML-136655 ML-136649 ML-136650 ML-136653 ML-136647 ML-136648 ML-136652 ML-1 ML-136651 ML-136681 ML-136657 ML-136656 ML-136654

Clearances:

Location:

CODES AND STANDARDS

In the United States: