Bosch Appliances HGS7052UC manual Operation - Oven, About the Oven Operation, 6 35 PM

Models: HGS7052UC

1 48
Download 48 pages 38.3 Kb
Page 19
Image 19
Lighting the Burner during a Power Failure
100 BAKE

is clean and dry. If the burner still fails to ignite, see “Cooktop Troubleshooting Chart” on page 38

 

Caution: All ignitors spark when any single burner is turned on. Do not

 

touch any of the burners when the cooktop is in use.

 

Lighting the Burner during a Power Failure

 

Cooktop burners can be lit manually during a power failure. Hold a match at the

 

port and turn the knob to the HI position. Wait until the flame is burning all the way

 

around the burner before adjusting the flame to the desired setting.

Setting the Flame Size

After lighting, turn the knob counterclockwise to the desired flame size. See

 

“Cooking Guide” on page 23 for recommended burner settings.

 

Caution: To prevent possible burns or possible damage to the pan or the appli-

 

ance, the flame should not extend beyond the edge of the pan.

Turning the Burner off

Turn knob clockwise to the OFF position.

 

Note: an “pop” may be heard when the burner is turned off. The “pop” may be

 

louder with LP gas than with natural gas. This is normal.

Operation - Oven

About the Oven Operation

Setting the Cooking

Mode

and Temperature

This section explains how to operate the oven. See “Getting the Most Out of Your Oven” on page 24 for guidelines to improve oven results.

CAUTION

Do not use aluminum foil or protective liners to line any part of an appli- ance, especially surface unit drip bowls or oven bottom. Installation of these liners may result in a risk of electric shock or fire.

Note: To back out of a current mode, press OFF. (Selecting OFF when not setting the cooking mode will turn the oven off.)

1.Press COOKING MODE.

2.BAKE will flash in the display.

3. If no change is made within 5 seconds,
6: 35 PM

380

control will beep and flash. If this occurs, press START.

4.To change the cooking mode, turn knob.

5.Press START.

6.The selected mode will appear in the display, along with the default tempera- ture for that mode, which will be blinking.

7.To select a different temperature, turn knob to the right or left (in 5° incre- ments) to desired temperature.

8.Press START. If not pressed, oven automatically turns on in 5 seconds.

English 17

Page 19
Image 19
Bosch Appliances HGS7052UC Operation - Oven, About the Oven Operation, Setting the Cooking Mode and Temperature, 6 35 PM