Bosch Appliances HGS7052UC manual Using the Probe some, models, Setting the Sabbath Feature

Operation - Oven
Setting the Sabbath Feature	See “Set the Sabbath Feature” on page 14.
Using the Probe (some	This section explains how to operate the probe. See “The Probe (some models)”
models)	on page 25 for guidelines, tips and suggestions.
	The probe can be used to determine the internal doneness or the “END” tempera-
	ture of many foods,especially meats and poultry.
	The temperature range for the probe is 135°F to 200°F (57°C to 93°C). Oven tem-
	perature can be set for 100°F up to 450°F (38°C up to 232°C).
Setting the Probe	1.	Prepare meat and place in roasting pan (or on rack in roasting pan as recipe
		specifies). Insert the probe into the meat. Make sure the probe is not touching
		gristle, fat, bone, the roast rack or the pan. See “Inserting the Probe” on
		page 25 for detailed instructions.
	Note: Do not connect to probe receptacle until probe tip is properly inserted into
	meat.
	2.	Place roasting pan with meat in cold oven on recommended oven rack. Plug
		probe into the probe receptacle. The probe symbol will appear in display.
	Note: The probe temperature can only be set when the probe is installed in the
	oven.
	3.	Press COOKING MODE and select BAKE, CONVECTION BAKE or CON-
		VECTION ROAST.
	4.	Press START. The default oven temperature will appear.
	5.	Turn knob to change oven temperature if necessary.
	6.	Touch START.
	7.	Turn knob to set the probe temperature (desired end temperature of the food).
	8.	Press START.
	The chosen oven temperature is displayed in the upper right hand corner of the
	display.
	The probe temperature is displayed in the center to the left of the cooking mode. It
	starts at 80 degrees and increases in 5°F increments until the chosen probe tem-
	perature is reached.
	The oven is preheated when the beep signals once.
	When the set probe temperature is reached, END appears in display and oven
	turns off.
Changing the Oven Temperature	1. Touch TEMPERATURE. Oven temp will flash in the display.
When Using the Probe	2.	Turn the knob to desired temperature and press START twice.

Changing the Probe Temperature 1. Touch TEMPERATURE. The oven temperature will flash.

2.Press start and PROBE TEMP will flash.

3.Turn the knob to desired temperature and press START again.

Note: Always remove probe from oven when cooking is complete. The probe symbol will remain in the display until the probe is removed. Do not leave probe attachment in oven during self-clean. Oven will not self-clean with the probe installed in the oven

English 20