Bosch Appliances SGV45E03UC manual To Remove the Fine Filter, To reinstall the filter system

Models: SGV45E03UC

1 64
Download 64 pages 9.11 Kb
Page 15
Image 15
To Remove the Fine Filter:

2.Grasp the assembly as shown in Figure 24 and turn it counter- clockwise 1/4 turn.

3.Lift out the assembly as shown in Figure 25.

4.Carefully examine the assembly. If you find debris in the Large Object Trap, turn it upside-down and gently tap it on a surface such as a countertop to dislodge and remove the debris. Flush the Cylinder Filter clean by holding it under running water.

To Remove the Fine Filter:

1.Lift the Fine Filter from the dishwasher floor as shown in Figure 26 A and flush it clean by holding it under running water.

2.Remove the Micro Filter as shown in Figure 26 B and flush it clean by holding it under running water.

To reinstall the filter system:

1.Return the Fine Filter to its installed position.

2.Place the Large Object Trap/Cylinder Filter Assembly into its installed position in the dishwasher floor.

3.Turn the ring handle clockwise 1/4 turn until it is locked. The arrow

on the ring handle and the arrow on the Fine Filter should point to each other, as shown by the circle in Figure 27.

4.Gently pull the ring handle to ensure that the assembly is locked into place.

ATTENTION

To avoid possible diswasher damage, do not use harsh chemicals, abrasive cleaners, scouring pads (metal or plastic), or abrasive cloths/paper towels to clean your dish- washer’s exterior door panel. Your dishwasher’s exterior door panel can be damaged by doing so.

Figure 25

Large Object Trap/Cylinder Filter

Figure 26

A

Fine

Filter

B

Micro

Filter

Figure 27

To close - turn clockwise.

15

Page 15
Image 15
Bosch Appliances SGV45E03UC manual To Remove the Fine Filter, To reinstall the filter system, Micro Filter