Figure 8/Ilus. 8
Figure 9/Ilus. 9
AHAM DW-1 10 Place Setting
Figure 10/Ilus. 10
AHAM DW-1 12 Place Setting
Figure 11/Ilus. 11
E n g l i s h
(Loading Your Dishwasher, continued)
B. Loading the Upper Rack Glasses, cups, plates, bowls, and small
pots may be loaded in many different positions. Figure 8 shows a typical mixed load in the upper rack. Figure 9 shows the top rack load pattern for 10 place settings, and Figure 10 shows load pattern for 12 place settings.
Upper Rack Height Adjustment
The upper rack of your Bosch dishwasher is adjustable with our exclusive RackMatic™ adjustment.
Using the RackMatic Adjustment
To lower the upper rack:
1)Pull the upper rack out of the dish- washer until it stops rolling.
2)Press the RackMatic™ handles inward, as shown in Figure 11, and let the rack
drop gently while supporting it with your hands.
To raise the upper rack:
3)Pull the upper rack out of the dish- washer until it stops rolling.
4)You do not need to press the RackMatic™ handles to raise the rack. Grasp the upper rack by the upper edge and gently pull it upward, as shown in Figure 12, until the RackMatic™ handles lock the rack into position.
5)Before you push the upper rack back into the dishwasher, ensure that the rack height is the same on both sides. Otherwise, the dishwasher door will not close and the upper spray arm will not connect to the water circuit.
(Continued on next page)
Figure 12/Ilus. 12
20 | Operation Fonctionnement Funcionamiento |
