Bosch Appliances X40 5.3Identification, Camera Names, Unit ID, 5.3.1Unit name

VideoJet X40 Configuration Using a Web Browser en 31

5.3Identification

5.3.1Unit name

You can give the VideoJet X40 a name to make it easier to identify. The name makes the task of administering multiple units in larger video monitoring systems easier, for example using the VIDOS or Bosch Video Management System programs.

The unit name is used for the remote identification of a unit, in the event of an alarm for example. For this reason, enter a name that makes it as easy as possible to quickly identify the location.

CAUTION!

!Do not use any special characters, for example &, in the name.

Special characters are not supported by the system's internal recording management and may therefore result in the Player or Archive Player being unable to play back the recording.

5.3.2	Unit ID
	Each VideoJet X40 should be assigned a unique identifier that you can enter here as an
	additional means of identification.
5.4	Camera Names

The camera name makes it easier to identify the remote camera location, in the event of an alarm for example. It will be displayed in the video screen if configured to do so (see Section 5.5.1 Camera name stamping, page 32). The camera name makes the task of administering cameras in larger video monitoring systems easier, for example using the VIDOS or Bosch Video Management System programs.

Bosch Security Systems Installation and Operating Manual V3.5 2007.12