96 en OperationVideoJet X40
6.2.5View ControlControl options for peripherals (for example a pan/tilt camera head or dome camera) depend on the type of unit installed and on the VideoJet X40's configuration.
If a controllable unit is configured and connected to the VideoJet X40, the controls for the peripheral are displayed next to the video image.
| 1. | To control a peripheral, click the appropriate controls. |
| 2. | Move the mouse cursor over the video image. Additional options for controlling |
|
| peripherals are displayed with the mouse cursor. |
6.2.6 | Digital I/O | |
| The alarm icons Input 1 to Input 4 are for information purposes and indicate the status of an |
| alarm input: When an alarm is triggered, the corresponding icon lights up blue. The unit's |
| configuration determines whether the alarm is displayed, as well as additional details (see |
| Section 5.32 Livepage Configuration, page 85). |
6.2.7 | Trigger Relay |
| You can switch connected units using the relays in the VideoJet X40 (for example lights or |
door openers).
X To activate this, click the icon for the corresponding relay next to the video image. The icon will be red when the relay is activated.
V3.5 2007.12 | Installation and Operating Manual | Bosch Security Systems |