64 en Configuration Using a Web Browser

VideoJet X40

 

 

5.22.9SSL encryption

The data for the connection, for example the password, can be securely transmitted with SSL encryption. If you have selected the On option, only encrypted ports are offered in the Remote port parameter.

NOTICE!

i

Please note that the SSL encryption must be activated and configured at both ends of a

 

 

connection. This requires the appropriate certificates to be uploaded onto the VideoJet X40

 

(see Section 5.35.4 Maintenance log, page 90).

 

 

 

You can activate and configure encryption of the media data (video, audio and metadata) on

 

the Encryption page (see Section 5.30 Encryption, page 82).

5.22.10

Auto-connect

 

Select the On option to automatically re-establish a connection to one of the previously

 

specified IP addresses after each reboot, after a connection breakdown or after a network

 

failure.

 

 

i

NOTICE!

By default, Stream 2 is transmitted for automatic connections. Bear this fact in mind when

assigning the profile (see Section 5.11 Encoder Profile, page 38).

 

 

5.22.11

Audio

 

Select the On option if you wish to additionally transmit a standalone G.711 encoded audio

 

stream with alarm connections.

5.22.12

Default camera

 

Here you can select the camera whose image will be automatically displayed first on the

 

receiver when the alarm connection is made. Depending on the system configuration, the

 

receiver can then select the other cameras as well.

 

 

i

NOTICE!

The numbering follows the labeling of the video inputs on the actual unit.

 

 

 

V3.5 2007.12

Installation and Operating Manual

Bosch Security Systems