VideoJet X40Configuration Using a Web Browser en 43
5.13 | Video Input |
| You can activate the 75 Ohm terminating resistance for each video input on the VideoJet X40. | |
| The terminating resistance must be deactivated for the video signal to be looped through. | |
| Every video input is closed at the time of delivery. | |
|
| |
i | NOTICE! | |
The numbering follows the labeling of the video inputs on the actual unit. | ||
| ||
|
| |
5.13.1 | 75 Ohm termination | |
| Select Off if the video signal is to be looped through. | |
5.13.2 | Source type | |
| To allow VCRs to be connected as a video source, you can change the characteristic of the | |
| video source from the preset value of Camera to VCR. VCRs require a more tolerant setting | |
| for the internal PLL as a result of jitter effects caused by the mechanical components of a | |
| VCR. | |
|
| |
i | NOTICE! | |
In some cases, selecting the VCR option can lead to an improvement in the video image even | ||
with a camera connected. | ||
|
|
Bosch Security Systems | Installation and Operating Manual | V3.5 2007.12 |