VideoJet X40

Configuration Using a Web Browser en 73

 

 

5.26.3Relay follows

If required, select a specific event that will trigger the relay. The following events are possible triggers:

–Off

Relay is not triggered by events

–Connection

Trigger whenever a connection is made

–Video alarm

Trigger by interruption of the video signal at the corresponding input

–Motion alarm

Trigger by motion alarm at the corresponding input, as configured on the VCA page (see Section 5.23 VCA, page 65)

–Local input

Trigger by the corresponding external alarm input

–Remote input

Trigger by remote station's corresponding switching contact (only if a connection exists)

NOTICE!

i The numbers in the lists of selectable events relate to the corresponding connections on the unit, Video alarm 1, for example to the Video In 1 connection.

5.26.4Relay name

You can assign a name for the relay here. The name is shown on the button next to Trigger relay. The Livepage can also be configured to display the name under the relay icon.

5.26.5Trigger relay

Click the button to trigger the relay manually (for testing or to operate a door opener, for example).

Bosch Security Systems

Installation and Operating Manual

V3.5 2007.12