BM 2610919169
Installing Power Cord
DIRECT CORD CONNECT
SYSTEM HAS BEEN CONFIGURED TO BE USED WITH 12AWG SJ CORD, MAXIMUM LENGTH OF 50 FEET. INSPECT THE CORD, DO NOT USE IF DAMAGED.
1. Loop cord as shown in figure A.
2. Insert looped end of cord through slot in handle and loop cord into channel provided in handle as shown figure. B).
ATTENTION: before inserting plug into handle, always make sure you leave enough cord at plug end to avoid tension on plug when inserted into tool.
3.Push end of plug through spring clip and into female outlet in handle as shown below .
4 To remove plug from tool, simply remove from outlet and pull away from spring clip. NOTE: If the spring clip does not securely hold the plug it may be necessary to lightly squeeze the clip together with a pliers.
FIG. A
SPRING CLIP | FIG. B | SPRING | CLIP | |
|
|
|
|
|
|
|
|
|
|
