Bose AM316835 Adjusting for comfort and stability, Using the adjustment slider, Using the lanyard

English

Adjusting for comfort and stability

There are several ways you can change your headset to provide additional comfort and stability. Using the adjustment slider, the clothing clip, and lanyard stability accessories, you can customize how you wear your headset.

Using the adjustment slider

Move the adjustment slider up or down to reduce or increase the amount of loose cord between the left and right earpiece. Finding the right position for the slider can help optimize the placement of the Answer/End button and integrated microphone.

Using the clothing clip

Use the clothing clip to fasten the cable to your clothing, for convenience, stability, and to help manage the cable. This can be helpful during high-movement activities or when using the headset in a single earpiece configuration.

The clothing clip should be attached below the Y-joint and be positioned to allow natural head movement, while keeping the micro- phone near your mouth.

Using the lanyard

The included lanyard provides additional stability to your head- set. You can use the lanyard on its own, or with the clothing clip for even greater stability.

1.Attach the headset cord through the right (R) and left (L) lanyard connectors below the microphone and approximately 10 inches (25.4 cm) below each ear piece.

Make sure the L and R marks point up toward the ear pieces.

2.Pull the lanyard over

your head and allow it to rest behind your neck.

3. Adjust the lanyard connectors have enough slack above the lanyard connectors so that any downward pulls on the plug end of the cord are not felt in the ears.

Note: Lanyard has a built-in safety release that separates when forcefully pulled.