126

Making Settings for USB Functionality

This section explains how to make settings for the BR-800’s
USB-related functionality. Make the settings that are
appropriate for how you’re using the BR-800.
1
Press the [MENU] button.
The MENU screen will appear.
2
Use the CURSOR [ ] [ ] buttons to move the
cursor to “USB,” and press [ENTER].
The USB screen will appear.
D_USB.eps
3
Use the CURSOR [ ] [ ] buttons to move the
cursor to “SETTING,” and press the [ENTER] button.
The SETTING screen will appear.
D_USB_Setting.eps
4
Use the CURSOR [ ] [ ] buttons to move the
cursor to the parameter that you want to edit, and use
the dial to edit the value.
For details on each parameter, refer to “Parameter List”
(p. 126).
5
Press the [EXIT] button a number of times to return to
the play screen.
Parameter List
Parameter/
Value Explanation
DIR MONITOR (Direct monitor)
This specifies whether the BR-800’s audio output will be
sent to the PHONES jack and LINE OUT jacks.
fig.block-direct_e.eps
OFF
Choose the OFF setting if the audio data is
being passed “thru” your computer.
If this setting is selected, you won’t hear
the sound unless Thru is enabled in your
computer.
ON
The BR-800’s audio input will be output
directly. Choose the ON setting if you’re
using the BR-800 on its own without con-
necting it to a computer. (If you choose
the OFF setting, only the sound being in-
put via USB IN will be output.)
INPUT LEVEL
-20–+20 dB This adjusts the level of the signal being
input via USB.
OUTPUT LEVEL
-20–+20 dB This adjusts the level of the signal being
output via USB.
INPUT MIX
This specifies whether the USB input will be mixed with
the BR-800’s output.
* If INPUT SELECT (p. 37) is set to “USB,” the INPUT
MIX setting is ignored.
OFF The input from USB will not be mixed
with the BR-800’s output.
ON The input from USB will be mixed with
the BR-800’s output.
Audio signals
Headphone
Monitor
speakers
DIR MONITOR
USB OUT USB IN
Audio OUT
Audio IN
BR-800 input
sound
Computer
LINEOUT
PHONES
BR800_e.book 126 ページ ２０１０年１１月２日　火曜日　午前８時２８分