EditingMasteringUsing USBConvenient
Functions
Appendixes Quick StartGetting Ready
to Record
Recording/
Playback
Using
Effects
Using
Rhythm
71
Using Insert Effects
*1 Setting available when TYPE is set to FLIP TOP, B MAN,
CONCERT 810, T.E., or SESSION.
*2 Setting available when TYPE is set to SUPER FLAT or AC
BASS.
*3 Setting available when TYPE is set to FLIP TOP,
CONCERT 810, or BASS 360.
*4 Setting available when TYPE is set to B MAN.
*5 Setting available when TYPE is set to CONCERT 810.
*6 Setting available when TYPE is set to T.E.
*7 Setting available when TYPE is set to SESSION.

BRIGHT *3

Turns the bright setting on/off.
OFF Bright is not used.
ON Bright is switched on to create a lighter and
crisper tone.

DEEP *4

OFF, ON This switch changes the character of the
lower range.

ULTRA LO *5

-, 0, + This controls the character of the lower
range.

ULTRA HI *5

OFF, ON This controls the ultra high-frequency
range lying beyond treble.

PRE SHAPE *6

OFF, 1, 2 This is a shape switch that adds a particular
nuance to the midrange.

ENHANCER *7

0–100 This controls the clarity and presence of the
sound.

RESPONSE *1

BASS, FLAT
This controls the overall amp characteris-
tics. Select the position corresponding to
the characteristics for one of the two types
of sound.

SP TYPE (Speaker Type)

Select the speaker type.
OFF This turns off the speaker simulator.
ORIGINAL This is the built-in speaker of the amp you
selected with PREAMP TYPE.
1x15” This is a compact open-back speaker cabi-
net with one 15-inch speaker.
1x18” This is a compact open-back speaker cabi-
net with one 18-inch speaker.
2x15” This is a general open-back speaker cabinet
with two 15-inch speakers.
4x10”
This is an optimal speaker cabinet for a
large enclosed amp with four 10-inch
speakers.
8x10” This is a double stack of two cabinets, each
with four 10-inch speakers.

MIC POS (Mic Position)

This simulates the microphone position.
CENTER
Simulates the condition that the micro-
phone is set in the middle of the speaker
cone.
Parameter/
Range Explanation
1–10
Simulates the condition that the micro-
phone is moved away from the center of
the speaker cone.

MIC LEV (Mic Level)

0–100 Adjusts the volume of the microphone.
D.LEVEL (Direct Level)
0–100 Adjusts the volume of the direct sound.
Parameter/
Range Explanation
BR800_e.book 71 ページ ２０１０年１１月２日　火曜日　午前８時２８分