EditingMasteringUsing USBConvenient
Functions
Appendixes Quick StartGetting Ready
to Record
Recording/
Playback
Using
Effects
Using
Rhythm
73
Using Insert Effects
Use TYPE to select the effect that you want to use.
ENHANCER
This is an effect that clarifies the contour of the input sound
by emphasizing the attack of the sound following changes
in the input level.
GTR SIM (Guitar Simulator)
Simulation of the characteristics of particular guitar
components such as pickups and different guitar bodies
allows you to switch among a number of different guitar
types all while using a single guitar.
MODULATION
Parameter/
Range Explanation
ON/OFF
OFF, ON
Turns the MODULATION effect on/off.
MOD TYPE (Modulation Type)
This selects the type of modulation.
* The available types will depend on the algorithm. For details
on the types that can be used with each algorithm, refer to
“Algorithm List” (p. 59).
ENHANCER Enhancer P.73
GTR SIM Guitar Simulator P.73
BASS SIM Bass Simulator P.74
SLOW GEAR Slow Gear P.74
DEFRETTER Defretter P.74
SITAR SIM Sitar Simulator p. 75
OCTAVE Octave p. 75
P SHIFTER Pitch Shifter p. 75
PHASER Phaser p. 76
FLANGER Flanger p. 76
TREMOLO Tremolo p. 76
ROTARY Rotary p. 77
UNI-V Uni-Vibe p. 77
PAN Pan p. 77
VIBRATO Vibrato p. 77
RING MOD Ring Modulator p. 77
CHORUS Chorus p. 78
DBL DELAY Doubling Delay p. 78
Parameter/
Range Explanation
SENS (Sensitivity)
0–100
This adjusts the Enhancer sensitivity.
The more the value is increased, the more
softly you can play and still have the effect
applied.
LOW FREQ (Low Frequency)
31.5Hz–125Hz Sets the low frequency range for the en-
hanced sound.
LOW LEVEL
0–100 Adjusts the enhancer volume for the low
frequency range.
HIGH FREQ (High Frequency)
800Hz–
8.00kHz
Sets the high frequency range for the en-
hanced sound.
HIGH LEVEL
0–100 Adjusts the enhancer volume for the high
frequency range.
Parameter/
Range Explanation
TYPE
Selects the type of the guitar simulator.
S
→
HChanges from a single-coil pickup tone to a
humbucking pickup tone.
H
→
SChanges from a humbucking pickup tone
to a single-coil pickup tone.
H
→
HF Changes from a humbucking pickup tone
to a single-coil pickup half tone.
S
→
HOLLOW
Changes a single-coil pickup tone to a full-
acoustic guitar tone with the body
resonance added.
H
→
HOLLOW
Changes a humbucking pickup tone to a
full-acoustic guitar tone with the body res-
onance added.
LOW
-50–+50 Adjusts the tone for the low frequency
range.
HIGH
-50–+50 Adjusts the tone for the High frequency
range.
BODY
0–100
Adjusts the way the body sounds when
Type is set to S
→
HOLLOW or
H
→
HOLLOW.
The body sound increases as the value is
raised; reducing the value produces a tone
similar to that from a piezo pickup.
LEVEL
0–100 Adjusts the volume.
Parameter/
Range Explanation
BR800_e.book 73 ページ ２０１０年１１月２日 火曜日 午前８時２８分