4.19Program Playback
It allows you to enter the order in which you want some chapters/tracks in DVD/VCD/MP3/WMA/CD to play.
1During playback, press the PROG button to enter a program interface as follows:
2Use the direction buttons to move cursor onto the desired place for inputting the sequence number.
3Use the number button to input desired sequence number of title/chapter/ track with desired sequence.
4Use the direction button to move cursor onto Play item, then press the OK button to play the programmed titles/chapters/tracks in programmed order; only pressing the PLAY button also can play the programmed titles/chapters
/tracks in programmed order.
*To exit program playback, firstly press the STOP button, then press the PLAY button to enter sequence playback; or press the PROG button twice again.
*To remove the all programmed sequence numbers, move the cursor onto Clear item, then press the OK button.
*To change the programmed sequence, move the cursor onto the item you want to change, input the desired sequence number.
*During VCD playback, if it is in PBC ON mode, at the same time of entering the state of program playback, it turns off PBC mode.
4.20 Playback IMAGE files
1.The root menu is displayed on the monitor when beginning to switch on IMAGE mode. .
In the root menu, the left file sort icon is for MP3/WMA file; the middle file sort icon is for IMAGE file; the right file sort icon is for VIDEO file. If one of these 3 file sort does not exist, you can not move cursor onto the file sort icon.
2.When displaying the root menu, press the direction buttons to select your desired FOLDER, file or file sort icon, then press the OK or PLAY button to open the FOLDER, or play the selected file, or play only this sort of file.
When displaying the root menu, you can also use the number buttons to select the serial number of the file and play the file.
When the AF switching mode is selected, the radio checks the signal strength of the AF all the time. The interval of checking time of each AFs depends on the signal strength of the current station, from a few minute for the strong station to a few seconds for the weak station. Every time when a new AF is stronger than the current station, it switches over to that frequency for very short time, and the NEW FREQUENCY is displayed for
In FM mode, when AF is on, SEEK, (SCAN),
10. TA [TRAFFIC ANNOUNCEMENT] BUTTON
Press the TA button briefly to turn on TA search mode. When traffic announcement is transmitted:
1).If the unit is in Disc Play mode, it will switch to radio mode temporarily.
2).Temporarily switches over to an station with traffic announcement, and TA, TP will be displayed on the monitor.
*TA interruption function:
The current traffic announcement is cancelled by pressing TA button briefly.
*When TA is on, SEEK, (SCAN), AUTO MEMORY functions can be received or saved only when traffic program identification code has been received.
4.Disc and USB Operation
4.1 Load/unload disc or USB
To play files in a disc or card, press the EJECT button to slide down the monitor . Then insert the disc or card into the disc slot or SD/MMC Card slot.
To unload the disc or card, press the STOP button twice to stop playback, then press the EJECT button to slide down the monitor and eject disc in the disc slot and then remove the disc; or push the card firstly and pull it out of the card slot.
To play files in an USB, insert the USB into the USB jack connecting to the Rear cabinet.
To unload the USB, press the STOP button twice and then remove the USB .
In USB or CARD mode, select your desired as right.
Remark: the 
icon is for audio files; the 
icon is for video files; the 
icon is for image files. Tap the 
icon to turn to main menu, tap the 
icon to turn to previous setting.
USB/CARD INTERFACE
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
