Boundless Technologies ADDS 3153 ASCII manual Local Keys

Local Keys 72

NOTES:

1This function is operational only if EIA (Aux) Rcv-Prtcl = Xon-Xoff/XPC or DTR.

2In ANSI emulations, this keystroke toggles in and out of Auto Print Mode.

3This function is operational even if Screen Saver is set to off.

4This function unlocks the keyboard, turns off all print modes and re-initializes the serial ports for setup parameters.

5The length of the Break Signal is dependent on the setup parameter of “EIA (Aux) Break.”

6This keystroke is dependent on the “Disconnect” setting in the “Keys” (F5) setup menu.

7The Increment Scroll Rate toggles the scroll rate to the fastest smooth scroll. This function also stops at the jump scroll. The Decrement Scroll Rate toggles from jump scroll to the fastest smooth scroll toward the slowest smooth scroll.

8These functions are not available in ANSI emulations.

9The Change Status Line function will toggle in the status line display from “Indicator” to “Host Write” to “Both” to “Off” in ANSI Emulations and “Standard” to “Extended” to “Off” on ASCII Emulations.

10For other keystrokes for these functions, see the Setup chapter.

11Keystrokes for these functions are only operational if the “Desk Acc= Sh-Ctrl-Fkeys” in the setup menu.

12When a Split Screen is not enabled, these keys select the next or previous pages. Wrapping takes place from the last page to the first and vice versa.

13These local functions are operational only if the selected page is available.