KEYBOARD: F4 37
Viewport 2 Bottom Row [20]
2 through page length minus 1. This specifies the last row number of the second viewport.
This parameter displays in Setup when number of viewports is greater than 2.
Pages [1-8]
Select the number of pages the user can access. The maximum number of pages is dependent on the page length. The number of pages is defaulted to 1 whenever the page length or columns is changed. The page selection will not display when viewports is greater than 1.
KEYBOARD: F4
Language: [U.S. , U.K., Danish, Finnish, French, German, Norwegian, Portuguese, Spanish, Brazilian, Swedish, Dutch,
Select the language type which matches your keyboard’s layout.
Language: [U.S. , U.K., Danish, Dutch, Finnish,
Select the language type which matches your keyboard’s layout.
Char Set Mode: [PC, ANSI, ASCII]
Choose which NRC set to use. This selection is only available in National Mode and foreign languages. In VT emulations, the default is ANSI. To determine which sets are loaded for each mode, refer to the 3153 Programmer’s Reference Guide.
Key Mode: [ASCII, ScanCode]
Select whether keys transmit ASCII codes or the ScanCode. The ScanCode transmits a “make code” when a key is pressed and a “break code” upon its release. When ScanCode is selected, “Comm Mode” is forced to Full Duplex and “Character Set” is forced to Multinational
Keyclick : [On, Off]
Choose whether pressing a key results in a clicking sound. The default is off in SCO Console emulation and IBM 3151.
Key Repeat: [On, Off]
Choose whether keys, including function keys, will repeat when pressed for more than half a second. This setting does not affect the following keys on the
Key Rate: [15 cps, 20 cps, 30 cps]
When “Key Repeat” is on, a key that is pressed for more than half a second will automatically repeat. This selection allows you to choose the number of characters that are generated per second when a key is auto repeating.