6 Introduction
Usage Notes
The following notations and symbols are used in this manual:
§
§Ctrl, F1: the two keys, Ctrl and F1, are to be pressed in succession.
§
§23h: the number 23 is represented in hexadecimal (hex) notation.
§ applies to ASCII emulations only:
§ applies to ANSI emulations only: VT300/8, VT300/7, VT200/8, VT200/7, VT100, SCO Console, and AT386.
§ applies to SCO Console and AT386 emulations only.
§ applies to IBM 3151 emulation only.
§ applies to parallel attribute emulations only which includes all emulations except
§applies to ASCII key
§applies to Scan
§applies to the
§applies to the ANSI keyboard only.