Boundless Technologies ADDS 3153 ASCII manual PROGRAM: F12

52 Setup

PROGRAM: F12

F1	F2	F3	F4	F5	F6	F7	F8	F9	F10	F11	Print
Quick	Genrl	Displ	Kybd	Keys	Ports	Host	Print	Emul	Tabs	AnsBk	Exec

Keys = F1

Param eters

Program = FKey

Key Dir = Host

Text: _________________________________________________________________________

_________________________________________________________________________

_________________________________________________________________________

_________________________________________________________________________

Label: _______________	Bytes Remaining: 0542
		Choices

F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12

Select

− → ↓ ← : Parameter Enter/S-Enter : Next/Prev Choice

Exit: Setup Key

Program: [FKey, Sh-FKey, Ctrl-Fkey, Ctrl-Sh-Fkey, Edit Key, Sh-Edit Key]

Specify the type of key to be programmed—function or edit key in its normal or shifted state.

When Fkey Speed is Fast in the EMUL (F9) menu, the Program options are F/Key and Sh-F/Key.

Key Dir: [Comm Depend, Host, Printer, Printer & Host, Screen, Host & Screen, Printer & Screen, All]

Select the destination of the contents of the function or edit key. Comm Dependent will cause the direction of the key data to correspond to the “Comm Mode” of the current session. For example, if the “Comm Mode” is Full Block, the contents of the key will be channeled to the screen only. If it were Full Duplex, then the contents would be sent to the host only.

Text: An edit field which permits up to 255 characters. Once the overall text limit (up to 542 characters) is reached, the terminal will beep and accept no more text. If the text is deleted with the backspace key, the default code is no longer programmed. Shift-Backspacewill restore the default. See the Edit Fields section or “Fkey Speed” in the Emulation section.