DLP ™ Digital Projector User’s Guide
Installation Steps
Getting Started
1.Place the projector on a flat surface.
2.Position the projector at the desired distance from the screen.
3.The projection distance is less than 33 feet (10M).
CAUTION:
•Proper ventilation is import. Don’t block ventilation openings. Never operate this projector in an enclosed area. Do not place the projector on a tablecloth or other soft covering that may block the vents. With ceiling installations, use approved mounting hardware. Do not put the projector near heater, air ducts, transformers or other electrical devices. For permanent installations follow local codes.
•Don’t set liquids on the projector. Spilled liquids may damage your projector.
•Don’t put the projector on a hot surface or in direct sunlight.
•Do not drop the projector.
ENGLISH
Connecting the Projector
1.Connect the power cable
2.When you connect the power cable to the projector, the Power LED & Lamp Ready LED on the control pad will illuminate, wait until LED stop flashing before turning on the projector.
Lights in green (Standby)
Audio input | DVI input port | ||
|
| (connects to computer, HDTV, | |
|
| and Component video player) | |
|
|
|
|
Power outlet
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AC IN Socket | USB Connector | |||
| Composite | (connects to PC mouse port so | ||
| Remote Control can be used as | |||
| Video input | a mouse control only) | ||
13
