DLP ™ Digital Projector User’s Guide
On-Screen-Display Menu Format and Description
The OSD menu will appear if any button is pressed thru using the control pad and remote control.
Input Source OSD
Display Logo
The projection image will appear in full brightness within
No Input Signal
“No Input Signal” will show on the screen when there is no active signal detected within 16 seconds.
Standby
When input signal is not detected for 16 seconds, the splash screen will appear until a signal is detected.
ENGLISH
Power off
The splash screen will be displayed for 6 seconds requesting power off confirmation.
Input Source
The splash screen will be displayed upon pressing the “Source” button on the top cover or remote control.
Press “bc” or “Source” to select the desired input source.
Source button on Remote control | Source button on control pad |
19
