Cycles

Perform all procedures listed in previous section also

1500

continued

Platform pivot pin bearings (2)

Platform fold axles (2)

Inboard locator lever bearings (2)

Inboard locator lever slot (2)

Rotating pivot slide arm pivot pins (2)

Parallel arm pivot bearings (16)

Switch arm pivot pin bearings (2)

Hydraulic cylinder bushings (8)

Inspect Lift-Tite™latch rollers for wear or damage, positive securement and proper operation (2)

Inspect inboard locator for:

•Wear or damage

•Proper operation. Inboard locator should just rest on top surface of the base plate.

Apply Light Oil - See Lubrication Diagram

Correct, replace defective parts and/or relubri- cate.

Resecure, replace or correct as needed. See Platform Angle Instructions and Platform Floor Level Adjustment Instructions.

Page 47