Maintenance and Lubrication Schedule
continued
Perform all procedures listed in previous section also
1500
Cycles
Inspect switch arm components for wear or dam- age, and for proper operation.
Inspect microswitches for securement and proper adjustment.
Make sure lift operates smoothly.
Inspect external snap
•Rotating pivot slide arm pivot pins (2 per pin)
•Rotating pivot slide arm roller axles (2 per pin)
•Platform cylinder pivot pins (2 per pin)
•Platform fold axles (1 per axle)
•Inboard locator lever bracket pins (1 per pin)
•
Replace defective parts.
Resecure, replace or adjust as needed.
Realign towers and vertical arms. Lubricate or correct as needed.
Resecure or replace if needed.
Inspect platform fold axles and bearings for wear or damage and positive securement.
Inspect Side Entry for proper operation, positive securement and wear or damage to nylon belt and roller chain.
Replace defective parts and resecure as needed. Apply Light Oil.
Correct or replace defective parts.
Page 48
