Trace Oxygen Analyzer

Maintenance

 

 

 

4.Remove the old sensor and install a new sensor by matching the orientation notch on the sensor to the silkscreen on the sensor holder.

Figure 5-1: Replacing the ZrO2 Sensor

5.3Fuse Replacement

1.Place small screwdriver in notch, and pry cover off, as shown in Figure 5-2.

Figure 5-2: Removing Fuse Block from Housing

Teledyne Analytical Instruments

53

Page 65
Image 65
Teledyne 3000ZA operating instructions Fuse Replacement, Trace Oxygen Analyzer Maintenance