Safety Precautions
RA200 Operation Safety Precautions (continued)
WARNING | Be aware of the ramp slope (angle). |
WARNING | Do not raise front wheelchair wheels (pull wheelie) when loading (boarding) the platform. |
WARNING | The wheelchair must be positioned in the center of the ramp when loading and unloading. |
WARNING | After manually releasing ramp, stow ramp and push manual release |
| move ramp in and out to engage ramp lock before driving vehicle. Failure to lock ramp may |
| result in unintended ramp deployment. |
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
Keep owner’s manual in
Never modify (alter) a Braun Corporation ramp.
Do not use accessory devices not authorized by The Braun Corporation.
Do not remove any guards or covers.
If the information contained in this manual is not fully understood, contact The Braun Cor- poration immediately.
Failure to follow these safety precautions may result in serious bodily injury and/or property damage.
Installation and Service Safety Precautions
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
Read this manual, supplement(s) before performing installation, operation or service proce- dures.
Check for obstructions such as gas lines, wires, exhaust, etc. before drilling or cutting dur- ing installation procedures.
Route all cables clear of exhaust system, other hot areas, moving parts, wet areas, etc.
Risk of electrical shock or fire! Use extra care when making electrical connections. Con- nect and secure as outlined in Installation Instructions and Wiring Schematics.
Maintenance and lubrication procedures must be performed as specified in this manual by authorized (certified) service personnel.
Disconnect the power cable at the battery prior to servicing.
Replacement parts must be Braun authorized replacements.
Never install screws or fasteners (other than factory equipped).
Failure to follow these safety precautions may result in serious bodily injury and/or property damage.
Page 5
