Braun RA200 service manual Installation Instructions, Photo C, Photo D

Installation Instructions

ER1301WS Installation:

Braun ER1301WS electronic controller 100465-002 is exclusive for Weight Sen- sor ramps. Install Weight Sensor RA200 models as outlined in this section.

Parts List (ER1319):

Item	Qty.	Description	Part No.
1	1	Control Box - ER1301WS	100465-002

Installation Procedures:

1. Mount ramp assem-	Ramp
bly using the eight	Mounting
holes shown in Photo	Holes
C. Mounting hardware
must be minimum 7/16"
or 12mm diameter.
Position the ramp, with
top cover lip flush with
vehicle door threshold.
Level the unit front-to-
back and side-to-side.
Mounting procedures
other than those speci-
fied here must be pre-
approved by a Braun
representative.

2.Route free end of ER1317WSA harness through vehicle floor structure to desired mounting location of con- trol box.

Photo C

Ramp

Mounting

Holes

Photo D

Ramp

Connection

Page 6