Cycles

	Inspect Lift-Tite™latches and gas springs for wear	Resecure, replace damaged parts or otherwise
	or damage (bent, deformed or misaligned), posi-	correct as needed. Note: Apply Light Grease to
	tive securement (external snap rings) and proper	Lift-Tite™latch tower pivot point if replacing latch.
	operation
	Inspect outer barrier for proper operation	Correct or replace damaged parts.
750	Inspect platform fold gear rack and gear weldment	Remove foreign objects, replace damaged parts
Cycles	Inspect platform fold gear rack and gear weldment	Remove foreign objects, replace damaged parts
Cycles	teeth for foreign objects, wear or damage (bent,	and resecure as needed
	deformed or misaligned), positive securement and
	proper operation
	Inspect lift for wear, damage or any abnormal	Correct as needed.
	condition
	Inspect lift for rattles	Correct as needed.

Perform all procedures listed in previous sections also

1500

continued

Outer barrier activation foot pivot bearings (2)

Outer barrier pivot arm bearings (4)

Upper fold arm cam followers (4)

Upper/lower fold arms (2)

Platform pivot pin bearings (4)

Lower fold arm bearings (8)

Inner roll stop lever bearings (2)

Inner roll stop lever slot (2)

Saddle support bearings (8)

Parallel arm pivot pin bearings (16)

Handrail pivot pins (2)

Hydraulic cylinder pivot bushings (8)

Inspect Lift-Tite™latch rollers for wear or damage, positive securement and proper operation (2)

Inspect outboard roll stop feet for proper opera- tion, positive securement and detached or missing torsion spring

Inspect inner roll stop for:

•Wear or damage

•Proper operation. Roll stop should just rest on top surface of the threshold (base) plate.

•Positive securement (both ends)

Inspect handrail components for wear or damage, and for proper operation

Apply Light Oil - See Lubrication Diagram

Apply Grease (synthetic) to contact areas be- tween upper/lower fold arms. See Lubrication Diagram

Apply Light Oil - See Lubrication Diagram

Correct, replace damaged parts and/or relubri- cate.

Resecure, replace or correct as needed. See Platform Angle Instructions and Floor Level Adjustment Instructions.

Replace damaged parts.

Page 14