Assembly and Operation of Your Wizz® Planetary Mixer
Assembling the mixer
Before using your Breville Wizz® Planetary Mixer for the first time, remove any packaging material and promotional labels. Ensure the speed control dial is in the ‘Off’ position, the mixer is switched off at the power outlet and the power cord is unplugged.
Remove the mixing bowl, beater, whisk and dough hook and wash in warm soapy water with a soft cloth. Rinse and dry thoroughly. The bowl and the attachments may be washed in the dishwasher.
NOTE: When first using your Breville Wizz® Planetary Mixer, you may notice an odour coming from the motor. This is normal and will dissipate with use.
Attaching the bowl
1.Place the mixer base on a level, dry surface such as a bench top. The mixer motor head should be in the horizontal (closed) position. Raise the mixer motor head by depressing the tilt back hinge button.
2.Lift the mixer motor head up until it tilts back and locks into the open position.
3.Insert the mixing bowl into the bowl locking recess of the mixer stand and turn clockwise until the bowl locks securely into place.
NOTE: To remove or insert the mixing bowl, the mixer motor head must be raised and locked into the open position.
Attaching the scraper beater to the mixer motor head
1.Ensure the mixer motor head is in the raised/open position. Align the groove in the top of the Scraper Beater with the locking pin on the spindle extending down from the mixer motor head.
2.Push the scraper beater upwards and turn clockwise until it locks securely onto the locking pin on the spindle (see Fig. 1).
11
