Breville BEM800 manual Assembly and Operation of Your Wizz Planetary Mixer continued, Pause Mode

Assembly and Operation of Your Wizz® Planetary Mixer continued

The count-down timer

The count-down timer is especially useful for any recipe that specifies the length of time ingredients should be mixed. For example, if a recipe reads, “beat for 3 minutes,” you can set the count-down timer to 3 minutes by pressing the up/down arrows. After 3 minutes of mixing, an alarm will sound and the motor will automatically turn off. The count-down timer will flash “OFF”. The control dial must to be rotated to the “Off” position to reset the timer and to continue mixing.

To set the count down timer, press the up or down arrows until the desired mixing time is displayed on the LCD screen.

NOTE: Press and hold the arrows down to scroll through the timer setting more quickly.

Rotate the dial clockwise to select the desired speed and to begin mixing. When the timer has finished counting down, “0:00” will flash on the LCD screen and a beep will sound to notify you that the time has expired. The mixer will automatically turn the motor off. The control dial must be rotated to the 'OFF' position to reset the timer and to continue mixing.

NOTE: The maximum time displayed on the timer is 9:59 (nine minutes, fifty-nine seconds). The mixer will automatically switch Off at 9 minutes 59 seconds. The control dial needs to be rotated to the “Off” position to reset the timer and to continue mixing.

Pause Mode

While mixing, at any stage, you can rotate the control dial to the “pause” setting. This will turn the motor off and “pause” the timer. This enables you to assess the mixing progress or add additional ingredients without effecting the timer.

For example, if you are mixing using the ‘count-up timer’ mode, you can rotate the control dial from one of the mixing speeds to “pause”. The mixer motor will stop and the timer will “pause”. Once ready, you can rotate the dial back to one of the mixing speeds, the timer will continue to count- up from the exact time it was paused. Alternatively, if you have turned the mixer to “pause” you can then reset the timer to 0:00 by rotating the dial to “Off” position.

If using the “pause” function in ‘count- down timer’ mode, you can suspend the timer at any stage during the count-down process by rotating the control dial to the “pause” setting. To continue mixing in the ‘count-down timer’ mode, simply rotate the dial back into one of the mixing speeds or alternatively to the “Off” position to reset the timer to 0:00.

Thermo cut-off – Temperature Overload

The mixer is equipped with a self-resetting safety device which safeguards against overheating the motor with excessive loads. If overheating occurs, the mixer will automatically activate the overheating protection device and the motor will switch

14