Breville BEM800 Assembly and Operation of Your Wizz Planetary Mixer continued, The count-up timer

Models: BEM800

1 60
Download 60 pages 15.21 Kb
Page 13
Image 13
The count-up timer

Assembly and Operation of Your Wizz® Planetary Mixer continued

1.Ensure the speed control dial is set to the ‘Off’ position, plug the cord into a 220-240v power outlet and switch the power ‘ON’ at the power outlet. The illuminated LED speed indicator band will flash and the Count Up/Down timer will display “0:00.” The mixer is now ready to be used.

NOTE: If the mixer has not been used for 3 minutes it will automatically go to a power saving “stand by mode.” The mixer can be left in stand by until the ingredients in the bowl are ready to be mixed. To exit stand by and begin mixing, turn the dial to the selected speed or press one of the ‘Count Up/ Down timer buttons.

2.Add ingredients to the mixing bowl as indicated in the recipe.

Always begin mixing by selecting a low speed setting on the speed control dial. This will prevent ingredients splattering. Increase the speed as suited to the mixing task. The speed setting can be adjusted during operation by moving the dial clockwise for the main mixing settings. Use the mixing guide in this booklet as a reference.

If necessary, stop the mixer during operation and scrape any food mixture down the sides of the mixing bowl with a spatula.

NOTE: Always turn the Breville Wizz® Planetary Mixer off if you need to scrape the bowl during use, and then switch back on and continue mixing.

The count-up timer

The count-up timer is especially useful to gauge mixing time or when recipe does not specify the mixing time. You can monitor the time it takes to thoroughly mix the ingredients, so that the next time you mix the same ingredients you can set the count-down timer for the specific time.

The count-up timer will automatically begin counting up as soon as the dial is rotated from ‘Off’ to one of the speeds. When the dial is turned to "Pause" the total time will be displayed on the LCD and will flash. When the dial is turned to "OFF", the LCD display will reset back to "0:00".

13

Page 13
Image 13
Breville BEM800 manual Assembly and Operation of Your Wizz Planetary Mixer continued, The count-up timer